Introducing the ProX XC-TR1FE12-10, a 10 ft 12AWG locking power cable built for the run from the distro to the fixture, with enough slack to clear a truss corner or reach across a riser. It pairs a standard Edison wall plug with a twist lock REAN® by NEUTRIK® powerCON TRUE1® connector, so moving heads, LED washes, powered speakers, and rack gear stay powered through vibration, cable pulls, and fast changeovers. For touring techs, rental houses, production companies, and install crews, this is the length that covers most real world drops without leaving a pile of extra cable on the deck.

REAN® by NEUTRIK® powerCON TRUE1® X-Series Female Connector The device end of the XC-TR1FE12-10 terminates in the RCAC3F-X-000-1 X-Series female connector, a locking 20A power connector trusted worldwide in professional lighting and touring rigs. It twists and latches into place and will not back out on its own. This is the same connector standard already fitted to the back of pro fixtures and powered loudspeakers, so it drops right into gear you own today.

Breaking Capacity for Connection Under Load The TRUE1 X-Series connector carries breaking capacity, or CBC, which means it is rated to be connected and disconnected under load when the job calls for it. That matters during a fast fixture swap or a set change when killing power at the distro is not an option.

IP65 Rated When Mated With the connectors joined, the TRUE1 connection carries an IP65 rating against dust and water. Outdoor stages, tented events, festival fields, and dusty load ins all put power connections at risk, and this cable is built to hold up in those conditions.

Ground First Contact Design The connector is designed so the ground contact engages before the current carrying pins. It is a small detail that adds a real layer of electrical safety every time you plug in.

NEMA 5-15P Edison Male Plug The source end uses a standard male Edison NEMA 5-15P plug, so it goes straight into any common wall outlet, power strip, or distro output with no adapter. You get pro grade locking protection at the fixture while keeping the input side universal.

12AWG Pure Copper Conductors Inside the jacket, 12AWG pure copper conductors carry serious current with minimal voltage drop. Thin copper clad aluminum cable heats up and starves fixtures at the end of a run. Pure copper at 12AWG keeps voltage where it belongs, which protects amplifiers, dimmers, and LED drivers across a long show day.

UL and cUL Certified Components The cable is built with UL and cUL certified components, so it meets recognized safety and compliance standards for professional venues, houses of worship, theaters, and permanent installations that get inspected.

10 ft Working Length At 10 ft, this is the workhorse length for truss drops, floor package runs, and distro to fixture jumps where 6 ft comes up short. It is also easy to coil and store, at roughly 2 lbs per cable, so a case of them will not weigh down the cable trunk.

Typical Applications
Moving head lighting fixtures
LED stage lighting systems
Powered PA speakers
Touring lighting rigs
DJ production setups
Power distribution systems
Concert stage equipment

Designed by Professionals. Built for Performers. Backed by 40 Years of Excellence.

ProX products are designed by a team of seasoned industry professionals who know firsthand what it means when power fails mid show. Since 1984, ProX has built its reputation on one principle: every product must perform as hard as the professionals who depend on it. We listen to our customers, and their real world feedback directly shapes the products we bring to market. The ProX XC-TR1FE12-10 is a direct result of that collaboration. When you choose ProX, you are investing in four decades of hands on expertise and a brand that has never stopped raising the standard for live performance gear.